Ricoh IS 2060, IS 2075 When copying onto standard size paper, When copying onto custom size paper

Copying from the Bypass Tray

BInsert the copy paper with the side you want to copy facing up until you hear the beep, and align the paper guide to the paper size.

1: Extender

Note

❒If the guides are not flush with the copy paper, images might be skewed or paper misfeed might occur.

❒Do not stack paper over the lim- it mark, otherwise images might be skewed or paper mis- feed might occur.

❒Swing out the extender to sup-

port paper sizes larger than A4L, 81/2" ⋅ 11"L.

❒Fan paper to get air between the sheets and avoid a multi-sheet feed.

CSelect the type and size of the pa- per.

When copying onto standard size paper

APress the {#}key.

BPress the [Select Size] key. CSelect the paper size.

DPress the [OK] key.

When copying onto custom size paper

APress the {#}key.
BPress the [Custom Size] key.
CPress the [Vertical mm] key, en-
ter the vertical size of the paper	2
with the number keys, and

then press the [#] key.

DEnter the horizontal size of the paper with the number keys, and then press the [#] key.

Note

❒If the [Horiz mm] key is not highlighted, press the [Horiz mm] key.

❒To register the custom size entered, press the [Program] key and then press the [Exit] key.

EPress the [OK] key.

When copying onto special paper

APress the {#}key.

BSelect paper type in "Special paper".

CPress the [OK] key.

DPlace your originals, and then press the {Start}key.

EWhen your copy job is finished, press the {Clear Modes} key to clear the settings.

21