Ricoh IS 2060 Directional Size Magnification mm, To specify a ratio with the n and o keys

Copy Functions

APress the [Reduce/Enlarge] key.

BPress the [Specifd. Ratio] key. CPress the [Direct. Mag.%] key.

To enter the ratio with the number keys

APress the [Horizontal] key.

BEnter the desired ratio with the number keys, followed by the [#] key.

CPress the [Vertical] key.

DEnter the desired ratio with the number keys, followed by the [#] key.

EPress the [OK] key.

To specify a ratio with the [n] and [o] keys

APress the [With no] key. BPress the [Horizontal] key.

CAdjust the ratio using the [n] or [o] key.

Note

❒Pressing the [n] or [o] key changes the ratio in 1% steps.

Pressing and holding down the [n] or [o] key changes it in 10% steps.

❒If you have incorrectly en-

tered the ratio, readjust the ratio with the [n] or [o] key.

DPress the [Vertical] key.
EAdjust the ratio with the [n]
or [o] key.
FPress the [OK] key.
DPress the [OK] key.
EPlace your originals, and then	2
press the {Start}key.

Directional Size Magnification (mm)

The suitable reproduction ratios will be automatically selected when you enter the horizontal and vertical lengths of the original and copy im- age you require.

1.Horizontal original size

2.Vertical original size

3.Horizontal copy size

4.Vertical copy size

Note

❒Specify the vertical and horizontal sizes of the original and those of the copy, as shown in the illustra- tion.

❒You can enter sizes within the fol- lowing ranges.

31