Ricoh IS 2075 Size Magnification, Directional Magnification %, APress the Reduce/Enlarge key

Copying

Size Magnification

This function calculates an enlarge- ment or reduction ratio based upon the lengths of the original and copy.

2
Amm	amm

Note

❒Measure and specify the lengths of the original and copy by compar- ing "A" with "a."

APress the [Reduce/Enlarge] key.

EEnter the length of the copy with the number keys, and then press the [#] key.

Note

❒To change the length after pressing the [#] key, select [Orig- inal] or [Copy] and enter the de- sired length.

FPress the [OK] key.

GPress the [OK] key.

HPlace your original, and then press the {Start}key.

Directional Magnification (%)

Copies can be reduced or enlarged at different reproduction ratios horizon- tally and vertically.

BPress the [Specifd. Ratio] key.

CMake sure that the [Size Magnifica- tion] key is highlighted.

DEnter the length of the original with the number keys, and then press the [#] key.

Note

❒You can enter sizes within the following ranges.

Metric	1 – 999mm (in 1mm steps)
version
Inch	0.1" – 99.9" (in 0.1" steps)
version

a:Horizontal ratio

b:Vertical ratio

Note

❒You can also select a preset ratio which is close to the desired ratio

by using [Reduce] or [Enlarge], then adjust the ratio with the [n] or [o] key.

30