Ricoh IS 2060 Programs, Storing a Program, BPress the Programkey CPress the Register key

3. Program

Programs

You can store the frequently used copy job settings in the machine memory and recall them for future use.

Note

❒You can store up to 10 programs.

❒You can select the standard mode or program No. 10 as the mode to be set when modes are cleared or

reset, or immediately after the op- eration switch is turned. ⇒ p.101 “Change Initial Mode”

❒Paper settings are stored based on paper size. So if you place more than one paper tray of the same size, the paper tray prioritized

with the User Tools (System Set- tings) will be selected first. ⇒“Pa- per Settings” General Settings Guide

❒Programs are not cleared by turn-

ing the power off or by pressing the {Clear Modes} key. They are canceled only when you delete or overwrite them with another pro- gram.

Storing a Program

AEdit the copy settings so that all functions you want to store in this program are selected.

BPress the {Program}key.

CPress the [Register] key.

DPress the program number you want to store.

Note

❒Program numbers with m al- ready have settings in them.

Reference

⇒p.84 “Changing a stored pro- gram”

83