Ricoh IS 2060, IS 2075 Edit 1/2, R/E Priority, Front Margin Left/Right, Back Margin Left/Right

Accessing the User Tools (Copy/Document Server Features)

❖R/E Priority

Specifies which tab is given priori- ty on the display panel when the

[Reduce/Enlarge] key is pressed.

Edit 1/2

❖Front Margin: Left/Right

You can specify left and right mar- gins on the front side of copies in Margin Adjust mode.

Note

❒You can enter the margins be- tween 0 and 30mm in 1mm steps (0”and 1.2”in 0.1”steps) with the number keys.

❖Back Margin: Left/Right

You can specify left and right mar- gins on the back side of copies in Margin Adjust mode.

Note

❒You can enter the margins be- tween 0 and 30mm in 1mm steps (0”and 1.2”in 0.1”steps) with the number keys.

❖Front Margin: Top/Bottom

You can specify top and bottom margins on the front side of copies in Margin Adjust mode.

Note

❒You can enter the margins be- tween 0 and 30mm in 1mm steps (0”and 1.2”in 0.1”steps) with the number keys.

❖Back Margin: Top/Bottom

You can specify top and bottom margins on the back side of copies in Margin Adjust mode.

Note

❒You can enter the margins be- tween 0 and 30mm in 1mm steps (0”and 1.2”in 0.1”steps) with the number keys.

❖1 sided→2 sided Auto Margin:T to T

In 1 sided → 2 sided Duplex mode, you can specify the margins on the back side.

Note

❒You can enter the margins be-

tween 0 and 30mm in 1mm 5

steps (0”and 1.2”in 0.1”steps) with the number keys.

❖1 sided→2 sided Auto Margin:T to B

In 1 sided → 2 sided Duplex mode, you can specify the margins on the back side.

Note

❒You can enter the margins be- tween 0 and 30mm in 1mm steps (0”and 1.2”in 0.1”steps) with the number keys.

❖Erase Border Width

You can specify the width of the erased border margins in this func- tion.

Note

❒You can enter the width be- tween 2 and 99mm in 1mm steps (0”and 1.2”in 0.1”steps) with the number keys.

❖Erase Original Shadow in Combine

In Combine Copy mode, you can specify whether to erase a 3mm, 0.1" bounding margin around all four edges of each original.

103