Ricoh IS 2075, IS 2060 Placing Custom Size Originals, BPress the Custm Size Origi. key

Placing Originals

CAlign the rear and left edges of the originals as shown in the il- lustration.

1

1	B4	A3
		2

CP19AE

BPress the [Custm Size Origi.] key.

CEnter the horizontal size of the original with the Number keys, and then press the [#] key.

Note

❒If you make a mistake, press the

[Print Inquiry List] or {Clear/Stop} key, and then enter the value again.

1:Place in into the document feed- er.

2:Vertical size

DAdjust the guide to the widest original size.

EPlace the aligned originals face up into the document feeder.

FPress the {Start}key.

DEnter the vertical size of the origi- nal with the Number keys, and then press the [#] key.

EPress the [OK] key.

FPlace the originals, and then press the {Start}key.

Placing Custom Size Originals

When placing custom size originals in the document feeder, specify the size of the originals.

Note

❒Paper that has a vertical length of 128–297mm (5" – 11") and a hori- zontal length of 128–1260mm (5" – 49.6") can be placed with this func- tion.

APress the [Special Original] key.

14