Ricoh IS 2060 Common Key Operations, Operation switch, Clip Tray, Sample Copykey, Startkey

11.Operation switch

Press this switch to turn the power on (the On indicator goes on). To turn the power off, press this switch again (the On indicator goes off). ⇒”Turning On the Power” in the General Settings Guide.

12.Clip Tray

Put clips and staples removed.

13.{Sample Copy}key

Use this key to make a single sample copy before starting a long copy run. By checking the sample copy and making any necessary changes to the image qual- ity settings before you make multiple copies, you can save time and paper. ⇒ p.39 “Sample Copy”

14.{Start}key

Press to start copying. Press to start scan- ning and printing in Document Server mode.

15.{Clear/Stop}key

•Clear

Press to delete a number entered.

•Stop

Press to stop a copy job in progress. Press to stop Scanning and printing in Document Server mode.

16.{#}key

Press to enter a value.

17.Number keys

Use to enter the desired number of cop- ies, and data for selected modes.

18.Function keys

These keys switch display to the operat- ing screen of each functions. Follow the instructions displayed by switching be- tween screen with the function keys.

19.Function Status indicator

These show the status of the above func- tions:

•Green: the function is active.

•Red: the function has been interrupt- ed.

Common Key Operations

The following keys are common to all screens.

[Exit]	Returns to the previous screen.
[Cancel]	Deletes a selected function or entered values, and then returns
	to the previous screen.
[OK]	Acknowledges a selected function or entered values, and then
	returns to the previous screen.
[▲Prev.] [▼Next]	Moves to the previous or the next page when all the functions
	cannot be displayed on one page.

v