Ricoh IS 2075, IS 2060 Copying from the Bypass Tray, Preparation, AOpen the bypass tray

Copying

Copying from the Bypass Tray

Use the bypass tray to copy onto spe- cial paper (OHP transparencies, label paper (adhesive labels), thick paper (for example postcards and enve- lopes), thin paper), and copy paper

2 that cannot be loaded in the paper trays.

Preparation

When copying from the bypass tray, select [1 Sided→ 1 Sided] for copying in [Dup./Combine/Series]. You can change the initial settings.

⇒p.101 “Duplex Mode Priority”

Important

❒When paper larger than 433 mm in size is used, the paper may become wrinkled, may not be fed into the machine, or may cause paper jams.

❒When copying onto special paper,

such as adhesive labels, be sure to select “Face up” in ⇒ p.109 “Eject Copy Face Up/Down in Bypass Mode”. If you select “Face Down”, a paper misfeed may occur.

Note

❒ The sizes of paper you can use with the bypass tray are as follows.

Metric	• Vertical: 100 – 305mm
version	• Horizontal: 139.7 – 600mm
Inch	•	Vertical: 3.9" – 12.0"
version	•	Horizontal: 5.5" – 23.6”

❒ The machine can automatically de- tect the following sizes as standard size copy paper.

Metric	A3L, A4L, A5L, 100 ⋅
version	148mm
Inch	A3	L	⋅	17"	L 1	⋅
version		, 11"			, 8 /2"
	14"L, 51/2" ⋅ 81/2"L, 100 ⋅
	148mm

❒If you want to use the size of paper

other than ones in the above table, be sure to specify the size. ⇒ p.21

“When copying onto standard size paper”, ⇒ p.83 “Program”

❒When copying on OHP transpar-

encies or paper heavier than 105

g/m2 (about 27.9 lb.), you need to specify the paper type. ⇒”Paper Type ”in the General Settings Guide

❒If you want copies to be delivered face down when placing the origi- nals on the exposure glass, select “Face down” for both”Eject Copy Face Up/Down in Glass Mode” and “Eject Copy Face Up/Down in Bypass Mode” of the User Tools.

❒If you have selected OHP transpar- encies or thick paper paper in “Special paper”, you cannot make copies to be delivered face down.

❒The maximum number of sheets you can load into the bypass tray depends on the paper type. The m a x i m u m n u m b e r o f s h e e t s should not execeed the upper lim- it.

AOpen the bypass tray.

20