Ricoh IS 2075 Supplementary Specifications, Batch Mode, Bypass Tray Copy, Preset Enlarge/Reduce

Specifications

Supplementary Specifications

❖Batch Mode

In the Batch mode, you cannot switch between 1–sided originals and 2–sided originals in the middle of copying.

❖Mixed Size mode

•Copy speed and scanning speed may be reduced.

❖Bypass Tray Copy

•The following paper sizes can be selected.

A3L, A4KL, A5KL, A6L, B4L, B5KL, B6L, 11 ⋅ 17L, Legal(81/2 ⋅ 14)L, Letter(81/2 ⋅ 11)KL, 51/2 ⋅ 81/2L, Executive(71/4 ⋅ 101/2)KL, 8 ⋅ 13L, 81/2 ⋅ 13L, 81/4 ⋅ 13K, 11 ⋅ 14L, 11 ⋅ 15K, 10 ⋅ 14L, 10 ⋅ 15L, 81/4

⋅14L, 8 ⋅ 101/2KL, 8 ⋅ 10KL, 12 ⋅ 18L, 8KL, 16KKL

•The number of paper you can set in the bypass tray depends on the paper type. If the number of the paper set exceeds the one in the table below, pa- per misfeed may occur or copies may be skewed.

	Paper type	Number
6
	Thick paper (105/157g/m2)	30 sheets
	Thick paper (157/216g/m2)	20 sheets
	Translucent paper	50 sheets
	OHP transparencies	50 sheets

❖Preset Enlarge/Reduce

Note

❒You can select one of 12 preset ratios (5 enlargement ratios, 7 reduction ra- tios).

❒You can select a ratio regardless of the size of an original or copy paper. With some ratios, parts of the image might not be copied or margins will appear on copies.

❒Copies can be reduced or enlarged as follows.

❖ Metric version

Ratio (%)		Original → Copy paper size
400	(enlarge area by 16)	--
200	(enlarge area by 4)	A5→A3, A6→A4, B6→B4
141	(enlarge area by 2)	A4→A3, A5→A4, A6→A5, B5→B4, B6→B5
122		F→A3, A4→B4
115		B4→A3

112