Ricoh IS 2060, IS 2075 Sample Copy, Changing the Number of Sets, BPress the Change Quantity key

Copy Functions

Sample Copy

Use this function to check the copy set- tings before making a long copy run.

Note

❒This function can be used only when the Sort function has been turned on.

ASelect Sort and any other func- tions, and then place the originals.

BPress the {Sample Copy}key.

ZGVS020E

One copy set is delivered as a sam- ple.

CIf the sample is acceptable, press the [Print] key.

The number of copies made is the number you specified, minus one for the proof copy.

Note

❒If you press the [Suspend] key after checking the results, re- turn to step A to adjust the copy settings as necessary. You can change the settings for Staple, Punch, Duplex, Copy Orienta- tion, Stamp, Margin Adjust, Cover/Slip Sheet and Desig- nate. However, depending on the combination of functions, you may not be able to change some settings.

Changing the Number of Sets

You can change the number of copy sets during copying.

Note

❒This function can only be used

when the Sort function has been
	2
turned on.

AWhile "Copying" is displayed, press the {Clear/Stop}key.

BPress the [Change Quantity] key.

CEnter the number of copy sets with the number keys, and then press the {#}key.

Note

❒The number of sets you can en-

ter differs depending on when the {Clear/Stop}key is pressed.

DPress the [Continue] key.

Copying starts again.

39