Ricoh IS 2060, IS 2075 Copy Face Up, Job Preset, Preparation, APress the Face Upkey, Startkey

Basic Procedure

Copy Face Up

Use this function to reverse the order of copies.

Preparation

Before using this function, register "Face up" for a copy function key.

⇒p.101 “Copy Function Key: F1–

F5”

APress the {Face Up}key.

BPlace the originals, and then press the {Start}key.

Job Preset

You can set up the next copy content during copy.

If a long copy job is in progress and you do not wish to wait for it to finish, you can use this function to set up the

next copy job in advance. When the 2 current copy job is finished, your

copy job will be started automatically. You can setup up to 8 copy jobs.

APress the [New Job] key when "Copying" is shown.

BSet up the next copy job.

CPlace the originals in the docu- ment feeder, and then press the

{Start}key.

All originals are scanned.

After the current copy job, the next job starts automatically.

Note

❒Each copy job you have set up is stored with a job number in the preserved job screen.

❒To switch the display to the cur- rent copy job, press the [Re- served] key, select the [Printing] key and then press the [Exit] key.

17