Ricoh IS 2075, IS 2060 operating instructions Problem, Cause, Action

4

Troubleshooting

Problem	Cause	Action
In Margin Adjustment	You set a wide erased mar-	Set a narrower margin with the User
mode, parts of the original	gin.	Tools. ⇒ p.103 “Front Margin:
image are not copied.		Left/Right”, ⇒ p.103 “Front Mar-
	There is a lack of margin
		gin: Top/Bottom”, ⇒ p.103 “Back
	space on the opposite side
		Margin: Left/Right”, ⇒ p.103 “Back
	of the binding position.
		Margin: Top/Bottom”
In Image Repeat mode, the	You selected copy paper	Select copy paper larger than the
original image is not cop-	the same size as the origi-	originals.
ied repeatedly.	nals, or you did not select
		Select the proper reproduction ratio.
	the proper reproduction
	ratio.
The stamp position is	The paper orientation is	Check the paper orientation and
wrong.	wrong.	stamp position.
When Combine, parts of	You specified a reproduc-	When you specify a reproduction
the image are not copied.	tion ratio that does not	ratio using Manual Paper Select
	match the sizes of your	mode, make sure that the ratio
	originals and copy paper.	matches your originals and the copy
		paper.

		Note
		❒ Select the correct reproduction
		ratio before using Combine
		mode.
Order of copies is not cor-	You placed the originals in	When placing a stack of originals in
rect.	the incorrect order.	the document feeder, the last page
		should be on the bottom.
		If you place an original on the expo-
		sure glass, start with the first page to
		be copied.
When Duplex, copy is	You placed the originals in	Place the originals in the correct ori-
made Top/Bottom even	the wrong direction.	entation. ⇒ p.10 “Original Orienta-
though Left/Right is se-		tion”
lected, or copy is made
Left/Right even though
Top/Bottom is selected.
Paper does not output dur-	When you stop printing	Press the {Reset}key and cancel
ing printing with stapling.	while using the staple func-	copy settings, including stapling.
	tion, papers not stapled
	during printing may be left
	in the staple unit.

88