SpecificationsAUDIO POWERSPECIFICATIONSPOWER OUTPUT AND TOTAL HARMONIC DISTORTION: (Models of area code U only)

With 8 ohm loads, both channels driven, from 20 – 20,000 Hz; rated 95 watts per channel minimum RMS power, with no more than 0.09% total harmonic distortion from 250 milliwatts to rated output.

Amplifier section

Models of area code U, CA1)

Minimum RMS Output Power (8 ohms, 20 Hz – 20 kHz, THD 0.09%)

95 W + 95 W

Stereo Mode Output Power (8 ohms, 1 kHz, THD 1%)

105 W + 105 W

Surround Mode Output Power2) (8 ohms, 1 kHz, THD 10%)

140W/ch

1)Measured under the following conditions:

Area code

Power requirements

U, CA

120 V AC, 60 Hz

 

 

2)Reference power output for front, center, surround and surround back speakers. Depending on the sound field settings and the source, there may be no sound output.

Frequency response

 

Analog

10 Hz – 70 kHz

 

+0.5/–2 dB (with sound

 

field and equalizer

 

bypassed)

Inputs

 

Analog

Sensitivity: 500 mV/

 

50 kohms

 

S/N3): 96 dB

 

(A, 500 mV4))

Digital (Coaxial)

Impedance: 75 ohms

 

S/N: 100 dB

 

(A, 20 kHz LPF)

Digital (Optical)

S/N: 100 dB

 

(A, 20 kHz LPF)

Outputs (Analog)

 

AUDIO OUT

Voltage: 500 mV/10

 

kohms

SUB WOOFER

Voltage: 2 V/1 kohm

Equalizer

 

Gain levels

±6 dB, 1 dB step

3)INPUT SHORT (with sound field and equalizer bypassed).

4)Weighted network, input level.

FM tuner section

Tuning range

87.5 - 108.0 MHz

Antenna

FM wire antenna

Antenna terminals

75 ohms, unbalanced

Intermediate frequency

10.7 MHz

AM tuner section

Tuning range

Area code

Tuning scale

 

10 kHz step

9 kHz step

 

 

 

U, CA

530 –

531 –

 

1,710 kHz5)

1,710 kHz5)

Antenna

Loop antenna

 

Intermediate frequency

 

 

450 kHz

 

5)You can change the AM tuning scale to 9 kHz or 10 kHz. After tuning in any AM station, turn off the receiver. While holding down TUNING MODE, press ?/1. All preset stations will be erased when you change the tuning scale. To reset the scale to 10 kHz (or 9 kHz), repeat the procedure.

82US