4b: Connecting the video components

How to connect your components

This section describes how to connect your video components to this receiver. Before you begin, refer to “Component to be connected” below for the pages which describe how to connect each component.

Before connecting the cords, be sure to disconnect the AC power cord (mains lead). After connecting all your components, proceed to “5: Connecting the antennas (aerials)” (page 26).

Video input/output jacks to be connected

The image quality depends on the connecting jack. Refer to the illustration that follows. Select the connection according to the jacks on your components.

 

Y

 

PB/CB

HDMI

VIDEO

 

PR/CR

 

COMPONENT VIDEO

Digital Analog

Started Getting

Component to be connected

Component

Page

TV

17

 

 

With HDMI jack

20

 

 

DVD player

22

 

 

Satellite tuner/Set-top box

23

 

 

DVD recorder, VCR

24

 

 

Camcorder, video game, etc.

24

 

 

High quality image

Note

Be sure to turn on the receiver when the video and audio signals of a playback component are being output to a TV via the receiver. Unless the power is turned on, neither video nor audio signals will be transmitted.

If you want to connect several digital components, but cannot find an unused input

See “Listening to digital sound from other inputs (DIGITAL ASSIGN)” (page 68).

19GB