Press V/v repeatedly to select “D. ASSIGN”.
Press or b to enter the parameter.
Press V/v repeatedly to select a vacant digital audio input (“SAT OPT” in the example).
Press menu.
or b to enter the
Press AMP MENU. “1-LEVEL” appears on the display.

Other Operations

Switching between digital and analog audio

(INPUT MODE)

When you connect components to both digital and analog audio input jacks on the receiver, you can fix the audio input mode to either of them, or switch from one to the other, depending on the type of material you intend to watch.

1 Turn INPUT SELECTOR on the receiver to select the input.

You can also use the input buttons on the remote.

2 Press INPUT MODE repeatedly on the receiver to select the audio input mode.

The selected audio input mode appears on the display.

Audio input modes

•AUTO

Gives priority to digital audio signals when there are both digital and analog connections.

If there are more than one digital connection, HDMI audio signals have priority over COAXIAL and OPTICAL audio signals. If there are no digital audio signals, analog audio signals are selected.

•ANALOG

Specifies the analog audio signals input to the AUDIO IN (L/R) jacks.

Notes

•Some audio input modes may not be set up depending on the input.

•When the ANALOG DIRECT function is being used, the audio input mode is set to “ANALOG” automatically. You cannot select other modes.

Listening to digital sound from other inputs

(DIGITAL ASSIGN)

You can reassign digital audio input that has OPTICAL or COAXIAL (SAT IN, DVD IN) signals to another input when they are not currently being used.

For example, to output the sound source for the DVD player using the OPTICAL IN jack on the receiver:

•Connect the optical output jack of the DVD player to the OPTICAL SAT IN jack of the receiver.

•Assign “SAT OPT” to “DVD” in the “D. ASSIGN” setting.

1

2 Press V/v repeatedly to select “5-AUDIO”.

3

4

5

6

7 Press or b to enter your selection.

68GB