5:Preparing the receiver and the remote
Connecting the AC power cord
Connect the AC power cord to a wall outlet.
AC power cord
L
+ –
R
FRONT B
SPEAKERS
LL
–+ –
AC OUTLET
| R |
OUND | FRONT A |
AC OUTLET
To the wall outlet
Notes
•Install this system so that the power cord can be unplugged from the wall socket immediately in the event of trouble.
•The AC OUTLET(s) on the rear of the receiver is a switched outlet, which supplies power to the connected component only while the receiver is turned on.
•Make sure that the total power consumption of the component(s) connected to the receiver’s AC OUTLET(s) does not exceed the wattage stated on the rear panel. Do not connect
Performing initial setup operations
Before using the receiver for the first time, initialize the receiver by performing the following procedure. This procedure can also be used to return settings you have made to their factory defaults.
Be sure to use the buttons on the receiver for this operation.
1,2
?/1
MASTER VOLUME
|
|
|
| MULTI CHANNEL DECODING |
|
|
|
|
| |
TONE MODE |
| TUNING MODE |
|
|
|
|
| DISPLAY | INPUT MODE |
|
– TONE + |
| – TUNING + |
|
|
|
|
| INPUT SELECTOR |
| |
SPEAKERS |
|
|
|
|
|
|
|
|
|
|
(OFF/A/B/A+B) |
|
|
|
|
|
|
|
|
|
|
AUTO CAL MIC |
|
|
|
|
|
|
|
|
|
|
|
| MEMORY/ | CATEGORY | – CATEGORY + |
|
|
|
|
|
|
|
| ENTER | MODE | 2CH | A.F.D. | MOVIE | MUSIC | MULTI CH IN | DIRECT | |
VIDEO 3 IN/PORTABLE AV IN |
|
|
|
|
|
|
|
| ||
PHONES |
|
|
|
|
|
|
|
|
|
|
VIDEO | L AUDIO R | DIGITAL(OPT) |
|
|
|
|
|
|
|
|
3
1 Press ?/1 to turn off the receiver.
2 Hold down ?/1 for 5 seconds.
“PUSH ENTER” appears on the display.
3 Press MEMORY/ENTER.
After “MEMORY CLEARING” appears on the display for a while, “MEMORY CLEARED” appears.
The following items are reset to their factory settings.
•All settings in the LEVEL, EQ, SUR,
TUNER, AUDIO, VIDEO, SYSTEM and AUTO CAL menus.
•The sound field memorized for each input and preset station.
•All sound field parameters.
•All preset stations.
•All index names for inputs and preset stations.
•MASTER VOLUME is set to “VOLUME MIN”.
•Input is set to “DVD”.
33US
Started Getting