If you are unable to remedy the problem using the troubleshooting guide

Clearing the receiver’s memory may remedy the problem (page 25). However, note that all memorized settings will be reset to their factory settings and you will have to readjust all settings on the receiver.

If the problem persist

Consult your nearest Sony dealer. Note that if service personnel changes some parts during repair, these parts may be retained.

Reference sections for clearing the receiver’s memory

To clear

See

All memorized settings

page 33

 

 

Customized sound fields

page 67

 

 

Specifications

AUDIO POWERSPECIFICATIONS

POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (Models of area code U only)

With 8 ohm loads, both channels driven, from 20 – 20,000 Hz; rated 100 watts per channel minimum RMS power, with no more than 0.09% total harmonic distortion from 250 milliwatts to rated output.

Amplifier section

Models of area code U, CA

Stereo Power Output1), Reference Power Output1)2)

8 ohms 20 Hz – 20 kHz, THD 0.09%

100 W + 100 W, 110 W/ch

8 ohms 1 kHz, THD 0.7%

110 W + 110 W, 120 W/ch

8 ohms 1 kHz, THD 10%

125 W + 125 W, 150 W/ch

1)Measured under the following conditions:

Area code

Power requirements

 

 

U, CA

120 V AC, 60 Hz

Additional

 

 

 

2)Reference power output for front, center, surround

 

and surround back. Depending on the sound field

 

settings and the source, there may be no sound

 

output.

 

 

Information

 

 

 

continued

97US