Connect the external equipment cables to the TV after installation

For Customers, Sony Dealers

1 Tilt the TV upward.

1Unplug the AC power cord.

2Unfasten the two securing screws at the bottom of the Mounting Rack (page 12).

3Hold the bottom left and right of the TV and gradually lift it upward.

Notes

Do not hold the transparent part of the TV.

Do not let go of the TV while lifting it, otherwise the TV may hit the wall and cause damage.

4Confirm the two support braces of the Plate Unit are locked into the bottom left and right

hooks on either side of the Mounting Rack.

5Insert the screws removed in the step 2 into the screw holes on the outer sides of the bottom left and right hooks of the Mounting Rack and tighten firmly to lock the support braces.

Screw hole for fixing the support braces

Support braces

2

3

2 Connect external equipment cables to the TV.

3 Restore the TV to the non-tilted position.

1Unfasten the screws tighten at the outer sides of the bottom left and right hooks of the

Mounting Rack in step 5 of procedure 1.

2Hold the bottom left and right of the TV and pull it out toward you so that the support braces are unlocked from the bottom hooks on the Mounting Rack.

Notes

Do not hold the transparent part of the TV.

Do not let go of the TV while lifting it, otherwise the TV may hit the wall and cause damage.

3Grasp the protruding part of the support braces with your other hand and slide it upward so that the support braces and the

TV are restored in the untilted position.

4Tighten the securing screws.

5Confirm that all the cables connected to the TV are not twisted or pinched, and then plug in the AC power cord.

WARNING

Be sure two or more people do this work.

Be careful not to pinch your hands or fingers.

3

14 (US)