2

Insert the locking rod.

The locking rod can be inserted from either side. The illustration below

 

 

shows an example of how to insert the locking rod from the right side.

 

1

Insert the longer side of the locking rod into the holes on bracket

 

 

E.

 

2

Insert the curved side of the locking rod into the hole on bracket

 

 

A. Hold and press the locking rod at part to pass its end

 

 

through the hole.

 

3

Turn the locking rod until it stops to secure it in place.

1

Note

 

Locking

3

rod

 

2

 

To prevent the locking rod from falling out of the brackets, the space between both ends of the locking rod is greater than that between the holes on the brackets. Hold and press the locking

rod at part

so that it can pass through the holes.

Caution

If the TV is lifted up when the locking rod is not installed properly, the TV may fall off the Wall-Mount Bracket and cause serious injury.

Be sure to insert and secure the locking rod in place.

continued

11