peb gninwar About
A warning beep sounds in the following cases:
•If you press TIMER ON/OFF when
–no program is set for timer recording/playback
–no cassette has been inserted
•If you try to change the timer program during timer recording/playback
•If you try to reset the clock during timer recording
•If you try to set for timer recording when the clock has not been set
Selecting the tape performance after a timer playback
MENU
CURSOR
4/$
EXECUTE
1 Press MENU and select 4.SET UP/USED TIME, then press
EXECUTE.
The SET UP menu appears.
[ SET UP ]
TIMER PB END | REW |
REPEAT MODE | REPEAT |
APC | ON |
DISPLAY | ON |
STOP TIMER | 5M |
THREAD CHECK | ON |
[ USED TIME ]
HEAD00000H
2
3
CH +/–
Press CURSOR 4/$to flash the setting of “TIMER PB END”.
Set to REW or STOP using CH
[ SET UP ]
TIMER PB END | STOP |
REPEAT MODE | REPEAT |
APC | ON |
DISPLAY | ON |
STOP TIMER | 5M |
THREAD CHECK | ON |
[ USED TIME ]
HEAD00000H
•When you select REW, the VCR stops playing at the preset stop time, rewind the tape to the beginning, and then turns off the power.
•When you select STOP, the VCR stops playing at the preset stop time, and then turns off the power.
4 Press EXECUTE, and then press MENU to return to the normal display.
35 (US)