Basic Operations
zWhat is the Enhanced Other Networks (EON)?
One convenient RDS service is ”Enhanced Other Networks” (or ”EON”). This allows the unit to automatically switch to a programme type of your choice when one starts in your broadcast area.
When your ampifier is connected to a Sony tuner with the EON CONTROL system, the amplifier switches to any EON programme that is broadcast in your EON area, and switches back to the last selected programme source when the programme ends.
EON LINK
STANDBY |
|
|
|
|
|
| INPUT SELECTOR |
| VOLUME |
|
|
|
|
|
|
| CD |
|
|
|
|
|
|
|
|
| AUX | TUNER |
|
g |
|
|
|
|
|
| TAPE2/MD | PHONO |
|
EON LINK | SPEAKERS | BASS | TONE | TREBLE |
| BALANCE | TAPE1/DAT |
|
|
ON | • |
| • |
| • |
|
| ||
OFF |
|
|
|
|
| ||||
|
|
|
|
|
|
| LOUDNESS | SOURCE DIRECT | TAPE MONITOR |
PHONES |
|
|
|
|
|
| ØON øOFF |
|
|
|
|
|
|
|
|
|
| 0 | 10 |
| +10 | +10 | LEFT |
| RIGHT |
|
|
1Make sure that the amplifier and the tuner are connected through the EON CONTROL terminals (see page 5).
2Press EON LINK so that the indicator lights up.
Whenever an EON programme starts on the radio frequency that your tuner is set to, you will receive it.
To cancel EON reception
Press EON LINK again so that the indicator goes off.
Notes
•If you select another programme source while receiving an EON programme, EON reception ends. However, as long as the EON LINK indicator lights up, you can receive EON programmes automatically.
•Make sure to cancel EON reception before starting to record since an EON programme may interfere with your recording.
•If you activate the Tape Monitor function (see page 9) while the EON LINK indicator is lit, the indicator goes off and you cannot receive EON programmes. If this happens, deactivate the Tape Monitor function so that the indicator lights up again.
8EN