Location of
Parts and Basic
Operations
This chapter provides information about the locations and functions of the buttons and controls on the front panel and the various jacks on the rear panel. It also explains basic operations.
Front Panel Parts
Description
1Uswitch
Press to turn the pre amplifier on and off.
•Before you turn on the pre amplifier, make sure that you have turned the MASTER VOLUME control to the leftmost position to avoid damaging your speakers.
STANDBY indicator
Lights when the pre amplifier is turned off (standby mode) using the supplied remote. Blinks momentarily after Uis pressed to turn the unit on, then goes out to indicate that the unit is ready.
2Input indicators
Light to indicate the current input.
3INPUT SELECTOR control
Turn to select the input you want to use.
To select | Turn to light |
INPUT 1 | 1 |
|
|
INPUT 2 | 2 |
|
|
BYPASS 5.1ch | BYPASS 5.1ch* |
|
|
BYPASS 2ch | BYPASS 2ch |
|
|
After selecting the input, turn on the component(s) connected to the input you selected and play the program source.
*The audio signal input to the BYPASS 5.1ch jacks is output from the PRE OUT jacks even when this unit’s power is turned off.