Sony TA-P9000ES Power Amplifier Hookups

Components the Up Hooking

Power Amplifier Hookups

Connect the rear, center, and front input jacks on your five channel power amplifier (Sony TA-N9000ES etc.) to the pre amplifier’s PRE OUT jacks. For details, see the operating instructions supplied with your power amplifier.

Connect a powered sub woofer to either of the PRE OUT WOOFER jacks. The same signal is output from both PRE OUT WOOFER jacks.

Required cords

Audio cords (3 cords are supplied)

When connecting a cord, be sure to match the color-coded pins to the appropriate jacks on the components.

White (L)	White (L)
Red (R)	Red (R)

Monaural audio cords (not supplied)

For the PRE OUT CENTER and PRE OUT WOOFER jacks.

Black Black

z When making woofer and center channel connections You can use one set of pins (e.g., red) on the audio cord (not supplied) to connect the CENTER jacks and the other set (e.g., white) to connect the WOOFER jacks.

TA-N9000ES etc.

+		FRONT SPEAKERS			+
	R	–	–	L
								Make sure to power off
( + )					( + )				when switching
BTL					BTL			NORMAL	BTL
								USE	USE	NORMAL	BTL
								4Ω MIN	8Ω MIN	USE	USE
( – )					( – )					8Ω MIN	16Ω MIN
+	R	–	–	L	+	–	+
		REAR SPEAKERS				CENTER SPEAKER		SPEAKER IMPEDANCE

S-LINK		INPUT			OPERATION
CTRL A1	REAR	CENTER	FRONT	EXTRA 2CH
					NORMAL BTL
R	L	R	L	R	L

TA-P9000ES

INPUT 1		INPUT 2		BYPASS 5.1ch		BYPASS 2ch	PRE OUT
FRONT REAR	CENTER	FRONT REAR	CENTER	FRONT REAR	CENTER		FRONT REAR	CENTER
L	L		L			L	L
									CTRL A1
R	R		R			R	R
	WOOFER		WOOFER		WOOFER			WOOFER	TO POWER AMP

Active Woofer

INPUT

AUDIO

IN

6GB