Sony TC-FX45 Features, Wow and Flutter 0.05% WRMS NAB, General, Blank skip function, Repeat play

Wow and Flutter: 0.05% WRMS (NAB)

±0.14% (DIN)

Inputs: Microphone inputs (phone jacks) Sensitivity 0.25 mV (-70 dB)

For a low-impedance microphone Line inputs (phono jacks)

Sensitivity 77.5 mV (-20 dB) Input impedance 47 k ohms

outputs: Line outputs (phono jacks)

Output level 0.44 V (-5 dB) at load

General

Power Requirements:

AEP model: 220 V ac, 50/60 Hz (240 V ac adjustable by authorized Sony personnel)

UK model: 240 V ac, 50 Hz

(220 V ac adjustable by authorized Sony personnel)

US, Canadian model: 120 V ac, 60 Hz

E model: 110,120,220 or 240 V ac ad- justable, 50/60 Hz

impedance 47 k ohms

Load impedance over 10 k ohms Headphone output

Output level -28dB at a load impedance of 8 ohms

FEATURES

Power Consumption: 14 watts

Dimensions: Approx. 430 x 105 x 275 mm (w/h/d) (17 x 4¼, x 107/s inches)

including projecting parts and controls

Weight: US, Canadian, AEP, UK model: Approx. 4.4 kg (9lbs 12oz)

E model: Approx. 4.5 kg (9 Ibs 15oz)

(OdB=0.775V 1

1 Tape Transport Mechanism Type 1 TCM-130VlO

Dolby NR C-type noise reduction system

In addition to the conventional B-type Dolby NR system, this cassette deck employs the newly-developed C-type Dolby NR system which reduces tape noise twice as effectively as the B-type system. The C-type system also incorporates an anti-saturation network to improve the high-frequency dynamic range by 4 dB at 10 kHz.

Full-logic “feather-touch” operation

At the slightest touch, the “feather-touch” function buttons enable you to switch directly from one mode to another without going through the stop mode.

Blank skip function

Blank spaces of at least 10 seconds long can be skipped in the fast- forward mode so that only the recorded portions of the tape are played back.

Music scan function

The first 10 seconds or so of all the selections on a tape can be played back in sequence. Thus the particular selection can be located easily.

Repeat play

Playback of one side of the cassette can be repeated five times. At the end of the tape, the cassette deck will automatically go into the rewind mode, and playback will be repeated from the beginning of the tape.

AMS (Automatic Music Sensor)

The AMS locates the beginning of the selection being played, or the following selection, by searching either forward, or in reverse, for the blank space between selections, and then plays back the selec- tion automatically.

Automatic tape select system

The tape type is automatically detected and the recorder is ad- justed to its optimum bias current for recording and the optimum equalization for both recording and playback by simply Inserting the cassette in the cassette holder.

Auto play

The auto play function makes automatic replay possible promptly after the tape is rewound to the beginning.

Remote control operation

Using the optional RM-50, RM-51 or RM-80 remote control unit, various operations-recording, playback, AMS, record muting operation, etc.-can be remotely controlled. When the RM-65 syn- chro remote control unit is used to connect this cassette deck with a turntable equipped with a synchro remote control jack, the opera- tion of the cassette deck and the turntable will be synchronized.

Timer-activated recording or playback

A timer switch is provided to turn the deck on and off at times preset on an optional timer.