Sony TC-WA9ES Recording on Both Decks in Succession (Relay Recording), Note, Press, Press, During, To record from, 7Start recording, 9/( REC r DIR MODE

Advanced Recording Operations

Dubbing only specific portions

You can do this only during normal-speed dubbing.

1Press pon deck A at the portion you want to skip. Deck B changes to recording pause.

2Locate the point you want to resume recording on deck A, then stop the tape.

3Press PAUSE Pon deck B to resume dubbing.

Recording on Both Decks in Succession (Relay Recording)

You can make a continuous recording that starts on a cassette in deck A and ends on a cassette in deck B.

9/( REC r DIR MODE

					¤						¤
									REC LEVEL
									4		5	6
									3			7
									2			8
									1			9
										0	10
						A	COUNTER		B
						RESET MEMORY		RESET MEMORY
					PITCH CONTROL ON/OFF				DUBBING LEVEL	BALANCE
					1	2	3
						DOLBY NR-
					4	5	6
					DIR MODE	AUTO CAL-
0	)	P	R	r	7	8	9	10	>10			0	)	P	R	r
								SYNCHRO DUBBING A B PHONE LEVEL
						START P		START (DECK B P)								PHONES
POWER	p	9		(								p		9		(

1Insert blank cassettes into both decks.Make sure that record-protect tabs on the cassettes have not been removed.2Select the Dolby NR system for both decks (see page 5).3Press DIR MODE repeatedly until “RELAY” appears in the display.4Press REC ron deck A.Deck A changes to recording pause.5Start playing the program source.6Adjust the recording level and balance (see pages 4 and 5).7Start recording.

	To record from	Press
	The front side	(on deck A
	The reverse side	9on deck A
To stop Relay Recording
During		Press
Recording on deck A		pon deck A
Recording on deck B		pon deck B

Note

Make sure that “á” on deck B appears in the display. If it doesn’t, press (on deck B once; otherwise, Relay Recording stops when the reverse side of the cassette in deck B finishes.

14