Sony TC-WA9ES TABLE OF CONTENTS

TABLE OF CONTENTS

Recording on a Tape 4

Playing a Tape 6

Getting Started

Unpacking 7

Hooking Up the System 7

Advanced Playback Operations

Locating a Track (Multi-AMS/Auto Play/Memory Play/Blank Skip) 9 Creating Your Own Program (RMS Play) 10

Playing a Tape Using a Timer 11

Advanced Recording Operations

Adjusting Bias and Recording Level Calibration Automatically 12 Dubbing a Tape 13

Recording on Both Decks in Succession (Relay Recording) 14 Recording the Same Source on Both Decks (Simultaneous Recording) 15 Recording Your Own Program (RMS Dubbing) 15

Inserting a Blank Space During Recording (Record Muting) 16 Synchro-Recording With a CD Player 16

Recording Using a Timer 17

Additional Information

Precautions 18

Notes on Cassette Tapes 18

Cleaning 19

Troubleshooting 20

Specifications 21

Glossary 22

Index 22

Contents

Page Welcome About This Manual TABLE OF CONTENTS Turn on the amplifier and play the program source you want to record Set TIMER to OFF and press POWER Press ¤OPEN/CLOSE and insert a cassette then press the button again to close the 7 Press PAUSE Por (. Recording starts 8 Start playing the program source Turn on the amplifier and select the tape deck position 5 Press The deck starts playing. Adjust the volume on the amplifier Unpacking Hooking Up the System Page Locating a Track (Multi-AMS Auto Play/Memory Play/Blank Skip) Creating Your Own Program (RMS Play) Playing a Tape Using a Timer Adjusting Bias and Recording Level Calibration Automatically PAUSE P 9/( AUTO CAL 1Insert the cassette you want to record on into either deck Make sure the record-protecttabs on the cassette have not been removed Dubbing a Tape You can do this only during normal-speeddubbing 2Locate the point you want to resume recording on deck A, then stop the tape Recording on Both Decks in Succession (Relay Recording) 9/( REC r DIR MODE 1Insert blank cassettes into both decks Make sure that record-protecttabs on the cassettes have not been removed 2Select the Dolby NR system for both decks (see page 5) Recording the Same Source on Both Decks (Simultaneous Recording) Recording Your Own Program (RMS Dubbing) Synchro-RecordingWith a CD Player Recording Using a Timer Precautions Notes on Cassette Tapes Cleaning Troubleshooting Specifications Glossary Index Buttons Switches Controls Connector Jacks