Sony TC-WA9ES Dubbing a Tape, Note, Note, Press, Press, select, During, (Continued), To record on, To record from, To stop dubbing, Do the following:, p 9/(DIR MODE NORMAL9

Dubbing a Tape

You can copy a tape in deck A to a tape in deck B at normal or high speed.AUTO PAUSE HIGH DUBBING LEVEL PAUSE P

					¤						¤
									REC LEVEL
									4		5	6
									3			7
									2			8
									1			9
										0	10
						A	COUNTER		B
						RESET MEMORY		RESET MEMORY
					PITCH CONTROL ON/OFF				DUBBING LEVEL	BALANCE
					1	2	3
						DOLBY NR-
					4	5	6
					DIR MODE	AUTO CAL-
0	)	P	R	r	7	8	9	10	>10			0	)	P	R	r
								SYNCHRO DUBBING A B PHONE LEVEL
						START P		START (DECK B P)								PHONES
POWER	p	9		(								p		9		(

p 9/(DIR MODE NORMAL9/(1Insert the recorded cassette into deck A and a blank cassette into deck B.

Make sure the record-protect tabs on the cassette in deck B have not been removed.

2Select the side(s) to be recorded on.

To record on	Press DIR MODE repeatedly to
	select
One side	A
Both sides	a. Recording on the reverse
	side on deck B starts
	independently of playback on
	deck A.
	RELAY. Recording on the reverse
	side on deck B starts
	simultaneously with playback of
	the reverse side on deck A.

3Press HIGH or NORMAL to select the dubbing speed.“HIGH” or “NORM” appears in the display.4Select the side from which to start dubbing.

To record from	Press
The front side	(
The reverse side	9

5Press PAUSE Pon deck B to start dubbing.To stop dubbing

During	Press
Normal-speed dubbing	pon deck B
High-speed dubbing	pon either deck

Advanced Recording Operations

Additional tasks during normal-speed dubbing

You can make the following tasks only during normal-speed dubbing. During high-speed dubbing, only pworks.

To	Do the following:
Adjust the dubbing	Turn DUBBING LEVEL.
level	To dub at the same level as the
	original, turn the control to the
	center-click position.
Select the Dolby NR	See pages 5 and 6.
system
Adjust the pitch	See page 6.
Skip over blank spaces	Press BLANK SKIP before you
on the original	start dubbing (see page 9).

Note

If a TV set is placed near the tape deck, noise may occur during high-speed dubbing. In that case, turn the television set off or move it away from the tape deck.

You can add fade-in/out during dubbing

Turn DUBBING LEVEL clockwise to fade in, or counterclockwise to fade out.

Dubbing only specific tracks (Auto Pause)

1Press AUTO PAUSE before or during normal-speed dubbing.“AUTO PAUSE” appears in the display.At the end of each track, both deck A and deck B pauses.

2Locate the track you want to record next on deck A (see page 9), then stop the tape.

3Press PAUSE Pon deck B to resume dubbing.To cancel the Auto Pause function

Press AUTO PAUSE again to turn off “AUTO PAUSE” in the display.

Note

Do not turn on the Pitch Control function (see page 6) or Blank Skip Function (see page 9) while using the Auto Pause function. If you do, the Auto Pause function may not work properly.

(Continued)

13