Sony TMR-BT10 To stop use, 1Turn off the BLUETOOTH receiving device, 2Press and hold the POWER button on this unit for about 3 seconds

•BLUETOOTH connection of this unit is established with A2DP (Advanced Audio Distribution Profile)*

•For details on how to operate the

BLUETOOTH receiving device, refer to the operating instructions supplied with the device.

* For details on profiles, see page 17.

4Start playing on the stereo audio source device connected to this unit.

Notes

•If sound is distorted, turn down the volume of the connected device.

•If volume is low or noise occurs, turn up the volume of the connected device.

•Turn off the bass boost function or equalizer function. If these functions are on, sound may be distorted.

Tips

•Turn up the volume of the stereo audio source device as high as possible to the extent that sound is not distorted, then adjust the volume on the BLUETOOTH receiving device to a moderate level.

•If this unit is in your bag, the BLUETOOTH connection may decline. Clip this unit on the bag.

Notes

•Even if the BLUETOOTH receiving device supports AVRCP (Audio Video Remote Control Profile), this unit cannot perform playback control functions.

•In the following cases, you need to make the BLUETOOTH connection again.

–The power of this unit does not turn on.

–The power of the BLUETOOTH stereo audio receiving device does not turn on, or the BLUETOOTH function is off.

–The BLUETOOTH function of this unit or the BLUETOOTH stereo audio receiving device is in sleep mode.

–The BLUETOOTH connection is not made.

To stop use1Turn off the BLUETOOTH receiving device.2Press and hold the POWER button on this unit for about 3 seconds.

The indicator (blue) and indicator (red) light up together, and the unit turns off.

Tip

When you finish playing music, the BLUETOOTH connection may terminate automatically, depending on the BLUETOOTH device.

13