Sony Trinitron CRT Monitor Installing or Removing the Tilt/Swivel Base, English, Introduction

INTRODUCTION

Installing or Removing the Tilt/Swivel Base

1.Turn off the system and all attached peripherals.

2.Carefully set the monitor upside down.

Remove the Tilt/Swivel Base:

1.Squeeze and hold the latches.

2.Pull the tilt/swivel base to the rear of the monitor and lift to remove the base.

Installing the Tilt/Swivel Base:

1.Align the base with the slots on the bottom of the monitor and insert the tilt/ swivel base into the slots.

2.Push the tilt/swivel base firmly toward the front of the monitor until the latches click into the locked position.

English

InstallRemove

5

¨ ¨ ¨