Symptom

Cause and/or Corrective Actions

 

 

The power abruptly turns off.

[A.SHUT OFF] in the (OTHERS) menu is set to [5 min]. (p. 57) cWhen approximately 5 minutes have elapsed while you do not operate

your camcorder, the camcorder is automatically turned off. Slide the POWER switch down to turn the power on again. (p. 15) Or use the AC adaptor.

A problem occurs when the camcorder is connected to the AC Adaptor.

cTurn off the power, and disconnect the AC Adaptor from the wall outlet. Then, connect it again.

Cassette tapes

Symptom

Cause and/or Corrective Actions

 

 

 

Cassette cannot be ejected from the

cMake sure the power source (battery pack or AC Adaptor) is connected

compartment.

correctly. (p. 12)

 

 

cRemove the battery pack from the camcorder, then attach it again. (p. 12)

 

cAttach a charged battery pack to the camcorder. (p. 12)

 

 

Cassette is not ejected even when the

cMoisture condensation is starting in your camcorder. (p. 99)

cassette lid is open.

 

 

 

 

 

 

 

The remaining tape indicator is not

cSet [

REMAIN] to [ON] in the

(TAPE SET) menu to always

displayed.

display the remaining tape indicator. (p. 53)

 

 

 

 

LCD screen/viewfinder

Symptom

Cause and/or Corrective Actions

 

 

An unknown language appears on the

cSee page 19.

screen.

 

 

 

An unknown picture appears on the

cThe camcorder is in [DEMO MODE]. (The [DEMO MODE] is

screen.

automatically displayed when you leave the camcorder for 10 minutes

 

after selecting CAMERA without inserting a cassette.) Insert a cassette

 

to cancel [DEMO MODE]. You can also set [DEMO MODE] to [OFF]

 

in the menu. (p. 56)

 

 

An unknown indicator appears on the

cRefer to the indicator list. (p. 108)

screen.

 

 

 

The picture in the viewfinder is not

cUse the viewfinder lens adjustment lever to adjust the lens. (p. 16)

clear.

 

 

 

The picture in the viewfinder has

cClose the LCD panel. The picture is not displayed in the viewfinder

disappeared.

when the LCD panel is open. (p. 16)

 

 

,continued

Troubleshooting

Troubleshooting 83