Advanced operations
Using alternative power sources
You can choose any of the following power sources for your camcorder: battery pack, house current, alkaline batteries
Place | Power source | Accessory to be used |
Indoors | House current | Supplied AC power adaptor |
Outdoors | Battery pack | Battery pack |
|
| |
|
| |
| Size AA (LR6) | Supplied battery case |
| Alkaline battery | TRV93 only) |
In the car | 12 V or 24 V car battery | Sony car battery charger |
Notes on power sources
•Disconnecting the power source or removing the battery pack during recording or playback may damage the inserted tape.
•The DC IN jack has power source priority. This means that the battery pack cannot supply any power if the power cord is connected to the DC IN jack, even when the power cord is not plugged into a wall outlet.
Using the house current
(1) Open the DC IN jack cover, and connect the AC power adaptor to the DC IN jack on the camcorder.
(2) Connect the power cord to the AC power adaptor.
(3) Connect the power cord to a wall outlet.
operations Advanced
1 | 2, 3 |
WARNING
The power cord must only be changed at a qualified service shop.
PRECAUTION
The set is not disconnected from the AC power source (house current) as long as it is connected to the wall outlet, even if the set itself has been turned off.
Note
Keep the AC power adaptor away from the camcorder if the picture is disturbed.
25