Using the FADER function
Using the fader function
When fading in [a]
(1) While the camcorder is in Standby mode, press FADER until the desired fade indicator flashes.
(2) Press START/STOP to start recording. The fade indicator stops flashing.
When fading out [b]
(1) During recording, press FADER until the desired fade indicator flashes.
(2) Press START/STOP to stop recording. The fade indicator stops flashing, and then recording stops.
The fading mode selected last is indicated first of all.
operations Advanced
1
FADER FADER
M.FADER
STRIPE
BOUNCE
MONOTONE
2
OCK
L
S
T
A
N
DBY
START/STOP
Note on the bounce function
When you use the following functions or D ZOOM is set to ON in the menu system, “BOUNCE” indicator does not appear.
–Wide mode
–Functions using the PICTURE EFFECT button
–Functions using the PROGRAM AE button
To cancel the fader function
Before pressing START/STOP, press FADER until the indicator disappears.
When the date or time indicator or title is displayed
The date or time indicator and title do not fade in or fade out.
When the START/STOP MODE switch is set to 5SEC or
You cannot use the fader function.
Note on the fader function
While using the bounce function, you cannot use the following functions.
–Exposure
–Focus
–Zoom
35