Manuals / Brands / TV and Video / TV Mount / Sony / TV and Video / TV Mount

Sony UMI-MDB3, UNIMDB3 instruction manual - page 2

1 7

If technical support or service is needed,

contact Sony at the following number.

TECHNICAL SUPPORT

8:15 AM to 7:30 PM

(EASTERN TIME)

1-800-883-6817

Contents

Main UNI-MDB3 Pendant/Wall Mount Bracket Page Slide the grommet up the pipe and screw the conduit locknut to the top of the threads. Wrap Teflon tape around pipe threads to ensure a water tight connection. Screw the pendant adapter snugly onto pipe. Tighten locking nut. 1 2 4 3 Make electrical connections then coil excess wiring under the pendant cover. Align Attach the mid-section of the housing to the top with the (4) screws and star washers. Fit the provided gasket into the circular groove on the camera base as shown. Gasket Camera Attach the dome assembly to the housing with security screws. Complete all wiring connections. Page LIMITED WARRANTY FOR SONY SECURITY SYSTEMS PRODUCTS DISCLAIMER OF WARRANTY LIMITATION OF LIABILITY