47
Copying Videos
The following appears in the display
window.
To pause recording
Press the (record) button during
recording. To resume recording, press
the (record) button again.
zHint
• This unit starts and stops recording
automatically as it detects video input signals
from a connected video device. For example:
– When you press the (record) button
before the connected video device starts
playing, this unit pauses. When the video
device starts playing back, this unit
automatically starts recording video.
– If you stop playback on the video device
during recording, video signal is interrupted
and this unit pauses recording. If you resume
playback on the video device, this unit
resumes recording.
When this unit waits a video signal to resume
recording, the message [Waiting for input
signal.] appears in this unit’s display window. If
no video signal is detected for 2 minutes, this
unit stops recording. (As video devices always
output video signals from their operation screen
or TV screen other than playback, some video
devices may not operate as above.)
3Press the (stop) button to stop
recording.
4To record an additional video,
repeat steps 2 and 3.
5Press the Z (eject) button to eject
the disc when recording is
complete.
A message asking whether to finalize
the disc appears.
6To finalize the disc, press V or v
to select [Yes] and press the
ENTER button.
If you select [No], the disc will be
ejected without being finalized.
zHint
• To finalize a disc means to make the disc
playable on other DVD devices. For details
about finalizing, refer to [Finalize disc] on page
57.