n116 N

Customizing Your VAIO Computer

Using Standby Mode

Standby mode turns off the LCD screen and sets the hard disk and the CPU to a low power consumption mode. The umber power light flashes in this mode.

To activate Standby mode

1Click Start and then Turn Off Computer.

2Click Stand By.

To return to Normal mode

Press any key.

!

If you slide up (in the direction of f on the switch) and hold the power switch for more than four seconds, the computer will turn off automatically. You will lose any unsaved data.

✍

The computer comes out of Standby mode quicker than out of Hibernate mode.

If the power switch is in the HOLD position, you can slide it up (in the direction of f on the switch) to return to Normal mode. Standby mode uses more power than Hibernate mode.

!

If the battery runs down while the computer is in Standby mode, the computer will automatically enter Hibernate mode.

If the computer is not used for 25 minutes, it will enter Standby mode. To avoid this, you can change the Standby mode settings.