VPCSB Series Hard Disk Drive Replacement Instructions

Step 2. Slide the Hard Drive/Battery Door towards the Bottom edge of the unit to remove.

Step 3: Take note of the Battery Pack and Hard Drive (HDD) location.

Step 4. Locate the Battery Lock. Slide down to the “UNLOCK” position and hold. Grasp the Battery from the Left side and lift up to remove.

HDD Removal

Step 1. Using two fingers, lift the HDD Cable straight up to disconnect from the unit.

Step 2. Using the enclosed magnetic screwdriver, remove the four (4) screws securing the HDD Assembly.

Put the screws aside to re-secure the HDD later in the procedure.

Step 3. Grasp the Right side of the HDD and carefully lift from the unit to remove.

HDD Disassembly

Step 1. Using two fingers, slide the Hard Drive Cable away from the Hard Drive to disconnect.

Step 2. Identify the four (4) side screws which secure the HDD Brackets to the HDD.

Step 3. Remove the screws & brackets.

Put the Brackets and screws aside for transfer to the new HDD.

FOR TECHNICAL SUPPORT IN THE US CALL TOLL FREE 1-866-651-7669 FROM 9:00 AM TO 11:00 PM EST

P/N 989202617

Rev. B

2/4

Page 2
Image 2
Sony VPCSB manual HDD Removal, HDD Disassembly