Connecting the

Projector

When you connect the projector, make sure to:

•Turn off all equipment before making any connections.

•Use the proper cables for each connection.

•Insert the cable plugs firmly; loose connections may increase noise and reduce performance of picture signals. When pulling out a cable, be sure to pull it out by the plug, not the cable itself.

For VPL-CX125/CX155/CW125, when connecting to a LAN using a LAN cable, see “Operating Instructions for Network” stored on the CD-ROM.

Connecting a Computer

This section describes how to connect the projector to a computer.

For more information, refer to the computer’s instruction manual.

To connect a computer

Side

NETWORK

 

RGB

AUDIO

INPUT A

 

INPUT B

INPUT C

 

 

 

MONITOR

AUDIO S VIDEO

VIDEO AUDIO

RS-232C

OUTPUT

 

VIDEO IN

REMOTE

to audio output

Computer

to monitor output

Picture the Projecting

AStereo audio connecting cable (not supplied) (Use a no-resistance cable.)

BHD D-sub 15-pin cable

Notes

•The projector accepts VGA, SVGA, XGA, WXGA, SXGA and SXGA+ signals. However, we recommend that you set the output mode of your computer to XGA (VPL-CX100/CX120/CX125/CX150/

Connecting the Projector

23