Sony VPL-CW125, VPL-CX100, VPL-CX120/CX125, VPL-CX150/CX155 Note, Notes, Notes, to display, Press INPUT, To input from, Using the adjuster

To operate with the Control Panel or the Remote Commander of VPL-CX100/CX120/CX150

Each time you press the INPUT key, the input signal switches as follows:

all-in-one LCD type, you may have to switch the computer to output to the projector by pressing certain keys (e.g., , etc.), or by changing your computer’s settings.

*VPL-CX125/CX155/CW125 only

To input from	Press INPUT
	to display
Computer, Component,	Input-A
Video GBR etc.
connected to the
INPUT A connector
Computer, etc.	Input-B
connected to the
INPUT B connector
Computer connected to	Input-C
LAN to use the network	(VPL-
presentation function	CX125/
	CX155/
	CW125 only)
Video equipment	Video
connected to the VIDEO
input connector
Video equipment	S-Video
connected to the
S VIDEO input
connector

Notes

•If “Auto Input Search” is set to “On,” the projector searches for the signals from the connected equipment and displays the input channel where the input signals are found.

•When the no signal is input to the VPL- CX125/CX155/CW125, “Input-C” is selected.

For details, see “Auto Input Search” in the Function Menu on page 39.

5 Switch the equipment connected to output to the projector.

Depending on the type of your computer, for example a notebook, or an

or
and
Note	Projecting
	the
The key used for switching the computer to
	Picture
output to the projector varies depending on
the type of computer.

6 Adjust the upper or lower position of the picture.

Use the adjuster to adjust the picture position.

Using the adjuster

1Lift the projector while pressing the Adjuster adjustment button.

2Adjust the tilt of the projector.

3 Release the Adjuster adjustment

button.

4 When fine-tuning is necessary, turn the Adjuster right and left.

2

13

4

Notes

•When you adjust the tilt of the projector with the adjuster, the V keystone

Projecting 27