5

6

Turn the zoom lever to adjust the size of the picture.Turn the focus lever to adjust the focus.

Attention

Looking into the lens when projecting may cause injury to your eyes.To adjust the volume

The volume can be adjusted in the on-screen menu. See “VOLUME” in the PICTURE CTRL menu on page 27.

To control the computer using the supplied Remote Commander

When you connect an IBM PC/AT compatible to the projector by using the USB cable, you can control the mouse of the computer using the Remote Commander.

The R/L CLICK keys and joystick function as follows.
Key and joystickFunction

 

 

R CLICK (front)

Right button

 

 

L CLICK (rear)

Left button

 

 

Joystick

Corresponds with the movements of the mouse

 

 

Note

Make sure that nothing obstructs the infrared beam between the Remote Commander and the remoter control detector on the projector.

To get the clearest pictureYou can adjust picture quality when projecting a signal from the computer.1 Project a still picture from the computer.2 Press the APA key.“Complete!” appears on the screen when the picture is adjusted properly.

Notes

•Press the APA key when the full image is displayed on the screen. If there are black edges around the image, the APA function will not function properly and the image may extend beyond the screen.

•When you switch the input signal or re-connect a computer, press the APA key again to adjust the picture again.

•You can cancel the adjustment by pressing the APA key again while “ADJUSTING” appears on the screen.

•The picture may not be adjusted properly depending on the kinds of input signals.

•Adjust the items in the INPUT SETTING menu when you adjust the picture manually.

GB 22 Projecting