21
Connections and Preparations
2Press the ?/1 (ON/STANDBY)
switch to turn on the projector.
The ON/STANDBY indicator flashes
in green, and then lights in green.
3Display a test signal for
performing adjustments.
Press the PATTERN button on the
remote control to display the test
signal.
Tip
Press the PATTERN button to clear the
test signal display.
4Move both lens shift dials to
adjust the picture position.
Flashes in green fo
r
a while (tens of
seconds) and then
lights in green.
To adjust the vertical
position
To adjust the horizontal position