Sony VPL-VW100 - page 15

VPL-VW100

SET (00h) Item No. n Set Data (n byte)

Request Item No. Data

Length Data

OK (01h) Item No. 0

3-4-1-4. SET Request

The SET request is used to set a new value in the specified item. Details of the request and the response

are described below.

Request

Response

3-4-1-5. GET Request

The GET request is used to acquire the value of the specified item. Details of the request and the response

are described below.

Request

Response

3-4-1-6. ERROR Response

When an error occurs in the contents of a request or in the result of execution, NG is returned as the

response.

OK (01h) Item No. n Get Data (n byte)

GET (01h) Item No. 0

Request Item No. Data

Length

NG (00h) Item No. 2 Error Code (16)

Contents

Main Page Table of Contents Appendix 1. Introduction 2. RS-232C 3. NETWORK Page 1. Introduction 2. RS-232C 2-1. Communication Specifications 2-2. Command Block Format 2-3. Block Format 2-5. Communication Procedure 2-5-1. Outline of Communication 2-4. Connection 2-6. Communication Rules 2-7. Approximate Return Waiting Times 3. NETWORK 3-1. Advertisement 3-1-1. Function 3-1-2. Setup Items 3-2. PJ Talk 3-2-1. Function 3-2-2. Setup Items 3-3. SDAP Protocol 3-4. SDCP Protocol 3-4-1. Format Page Page 3-4-2. Items Page 14 3-4-3. Error Code The error code list is shown below with a detailed description of each. Page Page Page 18 Appendix Page 20 Page 22 List of SIRCS CODE <20BIT CATEGORY> <Table 5> <15BIT CATEGORY> <Table 4>