Manuals / Brands / Computer Equipment / Projector / Sony / Computer Equipment / Projector

Sony VPL-HW30ES, VPLHW30AES Connecting to an Optional TMR-PJ1 3D Sync Transmitter*

1 91

Download 91 pages, 1.64 Mb

28

The optional TMR-PJ1 3D Sync Transmitter* is required to view projected 3D video

images.

Tip

Place the optional 3D Sync Transmitter directly facing the 3D glas ses. Also, in order to stabilize

operation of the 3D glasses, it is recommended that you place the 3D Sync Transmitter near your

viewing position.

CAUTION

Be sure to use straight-type LAN cable of up to 15 m la beled TYPE CM, and do not use

an extension cord.

• Turn off the projector before connecting the 3D Sync Transmitter, otherwise the 3D Sync

Transmitter is not recognized.

• The 3D SYNC con nector is dedicated for the optional 3D Sync Transmitter. Do not co nnect

computers or other network devices, to avoid malfunction.

• Be sure to use straight-type LAN cable (not s upplied) labeled Cat-7 (Category 7). If you use other

than the specified cable, the 3D Sync Transmitter may occasionally not work.

• Be sure to use cab le of up to 15 m, and do not use an extension cord. Also, keep th e LAN cable

away from any AC power cords as much as possible.

• Up to one TMR-PJ1 can be connected to a projector. Never connect multiple TMR-PJ1 units,

which may cause a malfunction.

* 3D Sync Transmitter is supplied with VPL-HW30AES.

Connecting to an Optional TMR-PJ1 3D Sync Transmitter*

Notes

Right side of the projector TMR-PJ1 3D Sync Transmitter

(not supplied)*

LAN cable (not supplied)

: 3D sync signal flow

Contents

Main Operating Instructions VPL-HW30ES/HW30AES Video Projector WARN ING AVERTISSEMENT WARNUNG Page Page 5 Table of Contents Others Projecting Location of Controls Connections and Preparations Using the Menus Page Precautions On safety On preventing internal heat build- up On repacking Front/Right Side Location of Controls - Location of Controls Rear/Bottom Remote Control ? / 1 Unpacking Inserting the batteries into the remote control Connections and Preparations Page Step 1: Installing the Projector Unsuitable installation Install in a location away from walls Before Setting Up the Projector Improper use WARNUNG 1 Positioning the Projector and a screen Connections and Preparations When using the 16:9 aspect ratio screen size When using the 4:3 aspect ratio screen size Page Step 2: Adjusting the Picture Position 2 3 1 5, 6 2 3 4 To adjust the horizontal position To adjust the vertical position 5 6 To adjust the tilt of the installation surface Step 3: Connecting the Projector To connect to equipment with HDMI output connectors Connecting to a VCR To connect to equipment with component video output connectors Connecting to a Computer Connecting to an Optional TMR-PJ1 3D Sync Transmitter* Step 4: Selecting the Menu Language Page Projecting the Picture on the Screen Projecting 1 2 3 Notes on input of HDMI signal 1 2 Turning Off the Power Selecting the Wide Screen Mode Notes on selecting the wide screen mode Zoom Full 1 (When a computer signal is input) Full 2 (When a computer signal is input) Watching 3D Video Images 1 2 3 4 1 2 3 Using the Simulated 3D Function 1 2 3 Using the 3D Glasses Selecting the Picture Viewing Mode Adjusting the Picture Quality Selecting to Directly Adjust the Desired Menu Item Adjusting the Picture Using Real Color Processing 1 2 3 2, 3, 4, 5 4 5 Operation through the Menus Using the Menus 2, 3, 4 Page 3 4 Items that cannot be adjusted To clear the menu To reset the picture that has been adjusted To reset the items that have been adjusted Picture Menu The Picture menu is used for adjusting the picture. Page Page Page Advanced Picture Menu The Advanced Picture is used for adjusting the picture more. Screen Menu Page Setup Menu The Setup menu is used to change the factory preset settings, etc. Page Function Menu Page Page Installation Menu The Installation menu is used for changing the installation settings. Page Information Menu About the Preset Memory No. About the Control for HDMI What is the Control for HDMI? Using the Control for HDMI function Connecting a Control for HDMI compatible equipment Others About the simulated 3D feature Troubleshooting Picture Power On-screen display Remote control 3D video images Others Warning Indicators Warning messages Caution messages Message Lists Replacing the Lamp and the Air Filter and Cleaning the Ventilation Holes (intake) 1 2 Page Page Cleaning the Air Filter Fitting the Lens Cap Cleaning and the Screen of the Projector How to Use the USB Charging AC Power Adaptor 1 glasses. 2 4 power adaptor into an AC outlet. Precautions about USB charging AC power adaptor Others Specifications System Input General Supplied accessories Warning on power connection Use a proper power cord for your local power supply. Preset Signals Preset memory numbers for each input signal Analog signal Digital signal Picture Menu z Input Signals and Adjustable/Setting Items Screen menu The projector accepts the following types of 3D signals. z Compatible 3D Signals 3D Signals and Adjustable/Setting Items Page Others Ceiling Installation When using the 16:9 aspect ratio screen size When using the 4:3 aspect ratio screen size Attaching the PSS-H10 projector suspension support Front view Side view Index Numerics A B C P R S T V