Text.fm Page 12 Tuesday, April 27, 2004 8:21 AM
Using the menu system
Tuning
The Tuning menu allows you to tune your receiver automatically or manually and also change the order of the programmes on display. During these procedures you may be requested to enter your PIN. Refer to page 11 for information.
Auto Tune
This tuning method captures and stores all available channels.
1With ‘Tuning’ highlighted in the main menu, press the OK button. Enter your PIN if requested and the Tuning display appears with ‘Auto Tune’ highlighted. Press the OK button to select. The
2Press the B button to select ‘Yes’, then press the OK button to begin autotune procedure. A display appears showing a tuning progress bar and the number of services found.
3When autotune has ended, a completion menu appears indicating the number of TV and Radio channels that have been captured and stored.
4Press the OK button to remove the display and view the first channel captured.
Manual Tune
This tuning method allows you to capture and store individual services.
1With ‘Tuning’ highlighted in the main menu, press the OK button. Enter your PIN if requested and the Tuning display appears with ‘Auto Tune’ highlighted. Press the V or v button to highlight ‘Manual Tune’, then press the OK button to select. The Manual Tune display appears showing a list of all the channels previously captured and stored.
2Press the Red button to display the previous five channels or the Green button to display the next five channels.
3Press the V or v button or enter a channel number to select the programme number of your choice, then press the OK button. The Tuning screen is displayed. Press the b button to highlight ‘Select Search’ then press the V or v button to begin searching.
4When a service is found the display now shows a list of captured channels. Press the V or v button to highlight the channel you wish to store, then press the OK button.
5If the channel you want is not in the displayed list, press the B button to highlight ‘Select Search’, then press the V or v button to continue searching.
6Once you have stored your desired channel, press BACK button repeatedly to return to the main menu.
Note: After tuning, your receiver will continually monitor broadcast information to check for new channels. Should a new channel become available, it is detected and automatically added to your programme list. Normally it will then be available to view. However, if you notice a new channel that you are unable to view, please tune it in manually using the ‘Manual Tune’ procedure as explained above.
12
Using the menu system
