RS-232C Command List

RS-232C Mode and the Memory Banks

Structure of the Memory Banks

RS-232C commands to change settings

DIP switches

Host computer

RS-232C ON

Volatile memory Activated settings

Read & Write

Read & Write

Non-volatile memory

Memory Bank A Series A of settings saved

Memory Bank B Series B of Settings saved

 

 

Read only

Memory Bank Factory

RS-232C OFF

Initial values set at the

 

 

 

 

factory

When power to the camera turned on, the settings on “Factory” is loaded automatically. (The AGC, Shutter, W.balance, and VBS/ YC settings made using the DIP switches or made using the R/B adjustment volume are enabled. )

The XC-555 is equipped with three Memory Banks (Factory/A/B) to hold camera settings. Factory is “read only,” holding the settings made when the camera was shipped from the factory. A and B can be written to, as well as read from, and the user utilizes these locations to hold setting values, calling them up when needed.

When the camera is in operation, valid settings are held in volatile memory. The user sends RS-232C commands to change the camera settings, overwriting the settings information held in these memory locations.

Using the “Memory Save” command, setting information can be written to either of the non-volatile Memory Bank A or Memory Bank B locations.

Using the “Memory Load” command, the information stored in Memory Banks Factory, A, or B, can be read out.

When power to the camera turned on, the settings information loaded with the most recent “Memory Load” command is read out of memory, and used as the current settings. (When the camera is shipped from the factory, the information stored in the Memory Bank Factory is set to be read out when power is turned on.)

Settings made with the DIP switches on the side of the camera or with the R/B adjustment volume are recognized as the same as some of those held in the Factory memory location. However, when “Memory

Load (Factory)” is carried out in RS-232C mode, settings made with the DIP switches on the side of the camera or with the R/B adjustment volume are rendered invalid, and the settings are returned to those made when the camera was shipped from the factory.

When the RS-232C switches hidden by the camera cover are set to OFF, Memory Banks A and B are disabled, so when power to the camera is turned on, the camera starts up normally, using the settings stored in Memory Bank Factory.

(This is the way the camera is shipped from the factory.)

19

Page 18 Page 20
Page 19
Image 19
Sony XC-555/555P technical manual RS-232C Mode and the Memory Banks, Structure of the Memory Banks
Page 18 Page 20

XC-555/555P specifications

The Sony XC-555 and XC-555P are advanced industrial cameras that have garnered attention for their high-performance capabilities in various applications, including machine vision, medical imaging, and scientific research. Known for their compact design and robust features, these cameras are built to deliver exceptional image quality and reliability.

At the heart of the XC-555 series lies a high-resolution CCD sensor that ensures clear and detailed images. The camera boasts a resolution of 1380 x 1024 pixels, allowing users to capture fine details in their imaging tasks. This high pixel count is particularly advantageous in industrial applications where precision is critical. The camera is capable of 30 frames per second, making it suitable for dynamic and fast-paced environments.

One of the standout features of the XC-555 is its versatile output options. It supports both analog and digital video output, providing flexibility for integration with various systems. The camera's analog output (CCIR or EIA formats) ensures compatibility with a wide range of devices, while the digital output caters to modern interfaces, including USB and FireWire connections. This dual-output capability makes the XC-555 an ideal choice for users needing to interface with different equipment.

The camera employs advanced signal processing technologies to enhance image quality. It features adjustable gain and shutter speeds, allowing users to fine-tune settings for optimal performance in varying lighting conditions. This adaptability is crucial for industrial environments where lighting can often be inconsistent.

Additionally, the XC-555 series incorporates a robust design, making it resistant to harsh operating conditions. Its compact form factor allows for easy integration into smaller spaces, making it a suitable choice for automation systems. The camera operates efficiently over a wide temperature range, ensuring reliable performance in diverse environments.

Another notable characteristic of the XC-555 is its user-friendly interface. The camera is designed for easy setup and operation, with intuitive controls that simplify the configuration process. Users can easily adjust parameters and settings to match their specific requirements, which enhances productivity and efficiency.

In conclusion, the Sony XC-555 and XC-555P cameras are distinguished by their high-resolution imaging, flexible output options, and advanced processing technologies. These features, combined with their robust design and ease of use, make them an excellent choice for a wide range of industrial and scientific applications. Whether for quality control, automation, or research, the XC-555 series stands out for its reliability and performance in capturing high-quality images.
Top Page Image Contents