A
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DISPLAY |
| BAND |
| SCAN |
| HD SCAN |
| MENU |
| TUNE |
|
|
| TUNE |
| ENTER |
| PRESET |
| PRESET | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SELECT
L | ANTENNA |
| |
AM | FM |
RESET |
|
R |
|
AUDIO OUT |
|
/
AC power cord4Press SELECT or until current hour appears in the display, then press ENTER.
The hour is set and the minutes start to flash.5Repeat step 4 to set the minute.NoteIf you do not set the menu within 65 seconds, the setting mode is canceled.To change the display to the daylight saving time (summer time) indication
1Press MENU to show the menu display.2Press SELECT or to select “DST,” then press ENTER.3Press SELECT or to select “ON,” then press ENTER.“ ” appears and the time indication changes to summer time.To deactivate the DST function, select “OFF” in step 3.Playing the radio
–Manual tuning
1Press / to turn on the radio.2Press BAND to select the band AM or FM.3Press TUNE + or – to tune in to a desired frequency.Note
The frequency cannot be input with the number buttons of the remote commander.Changing the display mode and settings
To change the display mode
Press DISPLAY.The display changes as follows:When an analog radio station is receivedFM
x
FM
AField strength level indicator B Preset number*C BandD Frequency E Current time*When you tune in a station by selecting a preset number.When an analog FM broadcast that supports RBDS (Radio Broadcast Data System) is received
FM
FM
x
FM
x
FM
AHD indicatorHD indicator | Reception status |
Stays lit | Strong HD signal, digital reception* |
Flashes | Weak HD signal, analog reception |
Not displayed | No HD signal, analog reception |
B Field strength level indicator |
C Preset number* |
D Call sign |
E Band |
F Song title/artist name |
G Channel number (FM only) |
Appears when HD Radio broadcasts multiple |
program. |
Setting the sleep timer
You can enjoy falling asleep to the radio using the builtin sleep timer that turns off the radio automatically after a preset duration.
1Press SLEEP on the remote commander.“SLEEP” and the digits for the sleep timer duration appear.FM SLEEPIf you press SLEEP while the unit is turned off, the unit is turned on.2 Press SLEEP repeatedly to select the desired sleep timer setting.Each press changes the setting time as follows:60 45 30 15 OFFAfter about 4 seconds, “SLEEP” lights in the display when the duration time is set.
The unit automatically turns off when the duration time is passed.To change the sleep timer settingYou can press SLEEP repeatedly to select the desired sleep timer setting even after the sleep timer has been activated.
To deactivate the sleep timerPress / to turn off the unit before the setting time has elapsed, or press SLEEP repeatedly to set the sleep timer to “SLEEP OFF” in step 2.
Note
|
|
|
|
|
|
|
| ||||
You can preset 20 stations each for AM and FM. |
|
|
| x |
| ||||||
Presetting a station |
|
|
|
| |||||||
|
|
|
|
|
|
| |||||
1 | Follow steps 1 to 3 in “Manual tuning” to tune |
|
|
| FM |
| |||||
2 | the frequency you wish to preset. |
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
| |||
Press and hold ENTER for a few seconds. |
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
| |||
| The display changes as follow: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
FM | x |
|
Press TUNE + or – to select a sub channel. |
H Frequency |
I Current time |
J Station name |
K Text information |
Note
The display item differs depending on the content of a broadcast or the station.
Resetting the unit
The RESET button is located on the rear of the unit. Press this button with a pointed object if the radio fails to function properly. The clock settings and stations you have preset, etc., will revert to the factory preset.
FM |
To change the display settings
Using the remote commander
B
SLEEP
1 2 3
4 5 6
7 8 9
0 ENTER
Note
If you try to store another station in the same preset number, the previously stored station will be replaced.
Tuning in to a station1 | Press / to turn on the radio. |
2 | Press BAND to select the band AM or FM. |
AField strength level indicator B Preset number*
C Band
D Station nameName of station currently tuned in.E Frequency F Current time G Text informationText information transmitted from station.* When you tune in a station by selecting a preset |
(BRIGHTNESS/CONTRAST)
1Press MENU to show the menu display.
2Press SELECT or to select “BRIGHTNESS” or “CONTRAST,” then pressENTER.3Press SELECT or to select the setting or to adjust the level, then press ENTER.
BRIGHTNESS:The brightness of the display is selected from “HIGH,” “MIDDLE” or “LOW.”CONTRAST:The contrast of the display can be adjusted byButtons shared on both the remote commander and the unit control the same functions.
HD SCAN buttonThe selected band is scanned, and receivable HD Radio stations are received for 3 seconds in order of frequency.
SCAN buttonThe selected band is scanned, and receivable radio stations are received for 3 seconds in order of frequency.
BRIGHT buttonTo adjust the brightness of the display.HD SCAN
TUNE/
SELECT SCAN
PRESET
BAND
3 Press PRESET + or – to select the desired |
preset number. |
Tip
The preset can be selected by pressing the number buttonnumber. |
Note
The display item differs depending on the content of a broadcast or the station.
Note
If you do not set the menu within 10 seconds, the setting mode is off.Specifications
Time displayMENU BRIGHT DISPLAY
Size AAA (R03)⋅ 2The number 5 and the PRESET + buttons have a tactile dot.–Scan tuning
The unit will automatically scan the selected band. In HD scan, HD Radio stations are scanned.
1 | Press / to turn on the radio. |
2 | Press BAND to select the band AM or FM. |
3 | Press SCAN or HD SCAN on the unit or |
| remote commander. |
| Scanning of the selected band starts. |
| When a station is received, scanning pauses for 3 |
Tip
You can adjust “BRIGHTNESS” directly by pressing BRIGHT on the remote commander.
Preparing the remote commander
Installing the batteries into the remote commander (See Fig. B)
Insert two size AAA (R03) batteries (not supplied).When to replace the batteriesWith normal use, the batteries should last for about six months. When the remote commander no longer operates the unit, replace all the batteries with new ones.
Notes
•Do not charge dry batteries.•When you are not going to use the remote commander for a long time, remove the batteries to avoid any damage caused by leakage and corrosion.
Setting the clock
1Plug in the unit.The display will flash “AM 12:00.”2Press MENU to show the menu display.3Press SELECT or to select “TIME SET,” then press ENTER.The hour will start to flash in the display.4 | seconds and then continues. |
When the unit tunes in to the desired station, | |
| do any of the following operations to stop |
| scanning. |
| – Press ENTER on the unit or remote commander. |
5 | – Press SCAN or HD SCAN. |
If necessary, press TUNE + or – to tune in to | |
| the station more precisely. |