7Troubleshooting Guide
Error Message | Problem |
Short Circuit? | The motor should have stopped, |
| but instead, it is still running. |
Solution
1.Turn the unit’s power off and on, adjust the settings, and attempt to resume pumping.
2.If the problem persists, call Customer Service.
>10,000 Liters!!! | Your pumping has exceeded the |
| maximum volume of 10,000 Liters. |
1.If you need to keep track of the amount of fluid dispensed, press the START/STOP key to stop the pump.
NOTE: In the future, to keep track of the amount of fluid dispensed, you must stop the pump before it reaches its upper limit of 10,000 liters.
2.If you do not need to keep track of the amount of fluid dispensed, you can ignore this message and let the pump continue to run.
>12:59:59! | Your pumping has exceeded the |
| maximum time of 12:59:59. |
1.If you need to keep track of how long the pump has been running, press the START/STOP key to stop the pump.
NOTE: In the future, to keep track of how long the pump has been running, you must stop the pump before it reaches its upper limit of 12:59:59.
2.If you do not need to keep track of how long the pump has been running, you can ignore this message and let the pump continue to run.
