Omega Speaker Systems FPU5-MT-110, FPU5-MT-220 manual Display Xxxxxx

Operating the Pump Motor in the RUNNING Display Mode 6

TIME

Display shows

xx:xx:xx

ACTION

Displays current

TIME setting

Display shows

xx:xx:xx

ACTION

TIME setting scrolls up



Display shows

xx:xx:xx

ACTION

TIME setting scrolls down

7.To change the SECONDS setting, press the TIME key repeatedly, until the SECONDS flash. Use the UP and DOWN ARROW keys to enter the SECONDS setting you desire.

8.Once the display shows the TIME setting you desire, press the START/STOP key. As the fluid begins to dispense, the non-flashing display shows the actual time that the pump has been running.

START

STOP

Display

xx:xx:xx

ACTION

Pump(s) starts;

press again pump(s)

stops

NOTE

In the TIME Mode, the pump stops running after it counts up to the TIME setting.

To stop pumping before that time, press the START/STOP key. The pump stops running, and the display returns to the STOPPED Display Mode.

Table 6-3 shows how other keys and buttons can be used while pumping in the TIME mode.

6-13