54
General settings
Touch c “General” c the desired item c the desired option. For details on this procedure, see
“Basic setting operation” on page 53.
For details, see the pages listed below. “z” indicates the default setting.
Item Option Purpose Unit status
Security Control (page61) ––Any status
Clock Adjust (page61) ––Any status
Auto OFF
Shuts off automatically after a
desired time when no source is
selected.
No (z)To deactivate the Auto Off
function. Any status
30sec, 30min,
60min To select the desired time.
CT (Clock Time) (page 21, 22) ON To activate the CT function.
Any status
OFF (z)To deactivate the CT
function.
Output Color System
Changes the color system
according to the connected
monitor.
(SECAM is not supported.)
PAL ( z)To set to PAL.
No source
selected
NTSC To set to NTSC.
Dimmer
Changes the display
brightness.
Auto (z)To dim the display
automatically when you
turn lights on. (Available
only when the illumination
control lead is connected.)
Any status
ON To dim the display.
Dimmer Level
Sets the brightness level when
the dimmer is activated.
(–5 ~ +5)
z: 0 To select the level. Any status
Touch Panel Adjust
(page51)
––Any status
Beep ON (z)To activate the operation
sound. Any status
OFF To deactivate the operation
sound.
Language English (z),
Español,
Русский
To select the display
language. No source
selected
Key Illumination ON (z)To turn on the button
illumination. Any status
OFF To turn off the button
illumination.