Presetting the RDS Stations with the AF and TA Data

When you preset the RDS stations, the unit stores each station’s data as well as its frequency, so you don’t have to turn on the AF or TA function every time you turn in the preset station. You can select different setting (AF, TA, or both) for individual preset station or the same setting for all preset stations.

Presetting the Same Setting for all Preset Stations

1 Select an FM band.

2 Press the

AF/TA

button repeatedly and

select either “AF ON”, “TA ON” or “AF/TA ON” (for both AF and TA functions).

Note that selecting “AF/TA OFF” stores not only RDS stations, but also non-RDS FM stations.

3 Press the BTMB button for more than two seconds.

Presetting different settings for each preset station

1 Select an FM band and tune in the desired station.

2 Press the

AF/TA

button repeatedly and

select either “AF ON”, “TA ON” or “AF/TA ON” (for both AF and TA functions).

3 Press the desired preset number button for two seconds until a beep sounds. Repeat from step 1 for presetting other stations.

Tip

If you want to change the preset AF and/or TA setting after you tuned in the preset station, you can do so by turning on/off the AF or TA function.

Locating a Station by Programme Type

You can locate the station you want by selecting one of the programme types shown below.

Note

If the countries or regions where EON data is not transmitted, you can use this function only for the stations you have tuned in once.

Programme types

 

Display

 

 

News

 

NEWS

 

Current Affairs

 

AFFAIRS

 

Information

 

INFO

 

Sport

 

SPORT

 

Education

 

EDUCATE

 

Drama

 

DRAMA

 

Culture

 

CULTURE

 

Science

 

SCIENCE

 

Varied

 

VARIED

 

Popular Music

 

POP M

 

Rock

 

ROCK M

 

Middle of the Road

 

M.O.R. M

 

Music

 

 

 

 

Light Classical

 

LIGHT M

 

 

EN

Classics

 

CLASSICS

RDS

Other Music Types

 

OTHER M

Not specified

 

NONE

Functions

 

 

 

 

 

 

 

Note

You cannot use this function in some countries where no

PTY (Programme Type selection) data is available.

1 Press the PTY button during FM reception until “PTY” lights up in the display.

￿

INFO

The current programme type name appears if the station is transmitting the PTY data. “- - - - -” appears if the received station is not an RDS station or if the RDS data has not been received.

2 Press the PTY button repeatedly until the desired programme type appears.

The programme types appear in the order as shown in the above table. Note that you cannot select “NONE” (Not specified) for searching.

￿

SPORT

continue to next page n

11

Actual total number:

Sony XR-6600RDS (E,F,G,I) 3-856-008-11(1)

 

 

Page 11
Image 11
Sony XR-6600RDS Presetting the RDS Stations with the AF and TA Data, Presetting the Same Setting for all Preset Stations