Locating the beginning of a track

—Automatic Music Sensor (AMS)

You can skip up to nine tracks at one time.

During playback, press either side of (SEEK/AMS) momentarily.

To locate the succeeding tracks

SEEK

AMS

To locate the preceding tracks

Note

The AMS function may not work when :

•the blanks between tracks are shorter than 4 seconds

•there is noise between tracks

•there are long sections of low volume or quiet sections.

Changing the displayed items

Each time you press (DSPL) during tape playback, the displayed item changes as follows:

z Tape playback z Clock z Frequency*

EN

*While the ATA function is activated.

Playing a tape in various modes

Searching for the desired track

—Intro scan

Press (1) during playback.

“INTRO” appears on the display.

The first 10 seconds of all the tracks are played.

When you find the desired track, press (1) again. The unit returns to the normal playback mode.

To cancel this mode, press (1) again.

Playing tracks repeatedly

—Repeat play

Press (2) during playback.

“REP” appears on the display.

When the current played track is over, it will be played again from the beginning.

To cancel this mode, press (2) again.

Switching to the radio while fast- winding a tape

—Automatic Tuner Activation (ATA)

Press (5) during playback.

“ATA” appears on the display.

When fast-forwarding or rewinding with (SEEK/AMS), the tuner will turn on automatically.

To cancel this mode, press (5) again.

Skipping blanks during tape playback — Blank skip

Press (6) during playback.

“BL SKIP” appears on the display.

Blanks longer than eight seconds will automatically be skipped during tape playback.

To cancel this mode, press (6) again.

6